75:1 Metallgetriebemotor 25Dx54L mm LP 6V mit 48 CPR Encoder hub-module Continuous output current: 3

Continuous output current: 3

Two axial capacitors are included and one or both can be installed by soldering them into the V+ and GND pins (labeled '+' and '-' on the bottom silkscreen) along the long edges of the board

±3° typische dynamische Pitch / Roll Genauigkeit

but it can be found in ST application note AN4545 (706k pdf) and design tip DT0037 (386k pdf)

Pololu Orangutan SV-xx8 and LV-xx8 User

75:1 Metallgetriebemotor 25Dx54L mm LP 6V mit 48 CPR Encoder hub-module Continuous output current: 3This geared motor consists of a 6V DC brushed motor. It combines a 74. 83: 1 spur gear made of metal and an integrated 48 CPR quadrature encoder on the motor shaft, which delivers 3591. 84 counting pulses per revolution of the gearbox output shaft. The geared motor is cylindrical, with a diameter of just under 25 mm. The D shaped output shaft has a diameter of 4 mm and measures 12. 5 mm from the gearbox end plate. Specifications at 6 V: 78 revolutions